VTEC Settings
VTEC Settings
VTEC settings
Enable VTEC: Enables/Disables VTEC function
VTEC RPM
Low Load Engage: RPM that the VTEC solenoid will engage on low load conditions
High Load Engage: RPM that the VTEC solenoid will engage on high load conditions
Disengage Delay: How many RPM the VTEC solenoid will disengage below the engagement point
TPS Threshold: Throttle position threshold that will switch between high/low load
MIn. Load: Minimum Load that that the system will permit VTEC solenoid engagement
Minimum ECT: Minimum engine coolant temperature that the system will permit VTEC solenoid engagement
Minimum Speed: Minimum vehicle speed that the system will permit VTEC solenoid engagement
Disable VTEC Speed Check: Disables the Minimum Speed condition
Disable VTEC Temp Check: Disables the Minimum ECT condition
DIsable VTEC Pressure Switch: Disables the Pressure Switch test (OBD2 Vehicles with OBD1 patch harnesses must have this ticked)
Disable VTEC Error Check: Disables the VTEC solenoid error check
Enable Alternative Output: Enables/Disables Alternative outputs for non-VTEC ECUS or If you need to repurpose the VTEC pin on a VTEC ECU (ECU Mods might be required)
Invert Output: Inverts the output signal for the selected channel